Features:
- Quickly measure large, flat areas for tritium (and C-14) surface contamination
- Sensitive Area: 100cm2 (6cm x 21.6cm)
- Sensitivity: 100 Bq/100cm2, 35 CPS above background
- Low gas consumption
- Portable, lightweight design with long battery life
- Audible and visible alarms, RS-232 data output
Description:
The Model FF-27 is an open-window gas proportional monitor for measuring tritium (and C-14) surface contamination on flat surfaces. The FF-27 utilizes a large, rectangular windowless probe with 100cm2 sensitive area (6cm x 21.6cm) to quickly scan large areas, using poly tape to provide repeatable spacing from the surface as well smooth, scratch-free movement. The poly tape is easily cleaned, but may also be replaced if contaminated.
P-10 counting gas is used in the FF-27. It is non-combustible and can be used in any environment. Two lecture cylinders for P-10 gas are included with the instrument but are shipped empty due to shipping restrictions. P-10 gas use is minimized by careful design of the probe and by auto shut-off of gas flow when the ‘trigger’ on the probe handle is released. Gas flow is typically set at 800 cc/min providing a total of one hour’s use for the lecture bottle size, or longer with a larger cylinder. Typical counting efficiency is 70% 2pi of all tritium beta emissions escaping the surface. An optional “Model H Face Plate” can be used which will help improve counting efficiency when measuring objects that aren’t completely flat, such as hands, clothing, and equipment.
Includes PRS-7 scaler/counter/analyzer, which is a digital display pulse counter that covers a 6-decade range (1-100,000 CPS or other unit of choice). The PRS-7 is battery-powered, with an internal lithium cell and charger, and an external 12V AC power input. The PRS-7 has a preamplifier with a built-in single-channel analyzer with two adjustable thresholds so that pulses may be selected by their pulse height and cancel out other noise. It can also scale the counter display by a multiplier over a wide range, and the display can show both pulse rate and total pulse count, with a timer that will stop the counter after a preset interval. Includes an adjustable high voltage power supply with a range of 200-2500 Volts, audible/visible alarms, and RS-232 data output.
For more info: https://overhoff.com/
Comments
Post a Comment